I keep getting this error for undernet(well basicly all servers)undernet is the one i want to connect to. Unable to connect to server (Connection refused)

This is the first thing that shows up
1. Connecting to us.undernet.org (6661)
2. Unable to connect to server (Connection refused)
3. Connect retry #1 us.undernet.org (6661) (dns pool)
4. Unable to connect to server (Connection refused)

My computer specs- Microsoft Windows Version 6.0 (Build 6000) Copyright 2006 Windows Vista Home Premium License to Hewlett-Packard Company


OS Name Microsoft® Windows Vista™ Home Premium
Version 6.0.6000 Build 6000
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Manufacturer Compaq-Presario
System Model GC666AA-ABA SR5152NX
System Type X86-based PC
Processor AMD Athlon(tm) 64 X2 Dual Core Processor 4000+, 2100 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Phoenix Technologies, LTD 5.06, 4/18/2007
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.0.6000.16407"
Time Zone Eastern Daylight Time
Total Physical Memory 1,917.94 MB
Available Physical Memory 603.66 MB
Total Virtual Memory 3.96 GB
Available Virtual Memory 1.46 GB
Page File Space 2.17 GB
Page File C:\pagefile.sys


Name NVIDIA GeForce 6150SE nForce 430
PNP Device ID PCI\VEN_10DE&DEV_03D0&SUBSYS_2A5B103C&REV_A2\3&2411E6FE&0&68
Adapter Type GeForce 6150SE nForce 430, NVIDIA compatible
Adapter Description NVIDIA GeForce 6150SE nForce 430
Adapter RAM 128.00 MB (134,217,728 bytes)
Installed Drivers nvd3dum.dll
Driver Version
INF File oem44.inf (nv_NV3x section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1024 x 768 x 60 hertz
Bits/Pixel 32
Memory Address 0xFB000000-0xFBFFFFFF
Memory Address 0xE0000000-0xEFFFFFFF
Memory Address 0xFC000000-0xFCFFFFFF
IRQ Channel IRQ 22
I/O Port 0x000003B0-0x000003DF
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nvlddmkm.sys (, 7.28 MB (7,629,376 bytes), 12/12/2007 2:50 AM)


Name PCI Soft Data Fax Modem with SmartCP
Description PCI Soft Data Fax Modem with SmartCP
Device ID PCI\VEN_14F1&DEV_2F20&SUBSYS_200C14F1&REV_00\4&612693E&0&5020
Device Type Internal Modem
Attached To COM3
Answer Mode Not Available
PNP Device ID PCI\VEN_14F1&DEV_2F20&SUBSYS_200C14F1&REV_00\4&612693E&0&5020
Provider Name CXT
Modem INF Path oem41.inf
Modem INF Section ModemX
Blind Off X4
Blind On X3
Compression Off +DS=0;+DS44=0;
Compression On +DS=3;+DS44=3;
Error Control Forced +ES=3,2,4;
Error Control Off +ES=1,0,1;
Error Control On +ES=3,0,2;
Flow Control Hard +IFC=2,2;
Flow Control Off +IFC=0,0;
Flow Control Soft +IFC=1,1;
Default <
Inactivity Timeout 0
Modulation Bell Not Available
Modulation CCITT Not Available
Prefix AT
Pulse P
Reset ATZ<cr>
Responses Key Name PCI Soft Data Fax Modem with SmartCP::CXT::CXT
Speaker Mode Dial M1
Speaker Mode Off M0
Speaker Mode On M2
Speaker Mode Setup M3
Speaker Volume High L3
Speaker Volume Low L1
Speaker Volume Med L2
String Format Not Available
Terminator <cr>
Tone T
Memory Address 0xFDEF0000-0xFDEFFFFF
I/O Port 0x0000CC00-0x0000CC07
IRQ Channel IRQ 18
Driver c:\windows\system32\drivers\modem.sys (6.0.6000.16386, 31.00 KB (31,744 bytes), 11/2/2006 4:58 AM)



Last edited by Name13013; 07/05/08 08:07 AM.