The usual problem: I can't DCC send or resume DCC gets.

Unfortunately my router's firmware settings are entirely undocumented. Not that that would help: I'm sure I've tried all that I can to allow DCC gets in IRC. (I also cannot set up a working FTP server.)

Anyway, I'm sure I've done everything I can possibly do with regard to NAT & port forwarding. (From what I've seen in this forum and elsewhere.) Since I'm pretty much at a loss I've made these screenshots of my router settings in the hope that there's something more subtle that might register with an expert.

(Who knows - maybe it's a bug with my router? The firmware update link doesn't work either!)

Btw, everything else is working for me: web browsing, etc,... even P2P sharing (u/ling - sometimes, at least - as well as d/ling)

http://homepages.ihug.co.nz/~ghawkins/01-wan-a.gif
http://homepages.ihug.co.nz/~ghawkins/02-wan-b.gif
http://homepages.ihug.co.nz/~ghawkins/03-lan.gif
http://homepages.ihug.co.nz/~ghawkins/04-ppp.gif
http://homepages.ihug.co.nz/~ghawkins/05-nat.gif
http://homepages.ihug.co.nz/~ghawkins/06-portforward.gif
http://homepages.ihug.co.nz/~ghawkins/07-miscconfig.gif

Incidentally, although the above settings don't reflect it, I have also tried a DMZ for my computer at IP 10.0.0.3. That didn't work either.

Btw, my modem/router is a Lectron AR800C2-A (http://www.lectron.com.tw/ar800c2.html)
The firmware (see screenshots) is apparently from Conexant.

Btw, I'm fairly sure my mIRC settings are what they should be. But I *could* be missing something there also... I don't understand the 'Bind sockets to IP address' option, for example.

Thanks for any help. It will be much appreciated.