/*
****************************************************************************
************** Twitch Multi-Tier Advanced Auto-Hosting Script **************
****************************************************************************
** This script is a three tier based auto-hosting script for twitch.tv.
** To use it, you must create an autohost.txt file in your mIRC directory.
** Put all of the channels that you want to auto-host on either line 1, 2, or 3 of autohost.txt.
** All channels on line 1 will be "Tier 1." All channels on line 2 will be "Tier 2."
** All channels on line 3 will be "Tier 3." Seperate channel names with a space.
**
** When the autohost alias is ran, it will search each tier in the order that channels are listed.
** If a Tier 1 channel is still live and being hosted, the script will simply end.
** If a Tier 2 channel is still live and being hosted, the script will look for a Tier 1 channel
** to host if the amount of time passed since the host began is greater than %t2.wait.
** If a Tier 3 channel is still live and being hosted, the script will look for a Tier 1 or 2
** channel to host if the amount of time passed since the host began is greater than %t3.wait.
**
** Set the variables below that are needed for the script.
** Change %mychan to your own channel name (keep the # symbol).
** Change %t2.wait to the amount of time (in seconds) that you want the autohost script to wait
** before trying to host a Tier 1 channel if a Tier 2 channel is still being hosted.
** Change %t3.wait to the amount of time (in seconds) that you want the autohost script to wait
** before trying to host a Tier 1 or Tier 2 channel if a Tier 3 channel is being hosted.
** Change %rh.wait to the amount of time (in seconds) that you want the autohost script to wait
** before being allowed to host the same channel again.
**
** This script needs the JSON and mTwitch scripts in the "required scripts" section of the GitHub.
** This script needs the $twitch_name alias and %mychan and %TwitchID variables from ankhbot.mrc.
**
** You will need to un-load and re-load this script for the changes to the variables below
** to take effect.
*/
ON *:LOAD: {
SET %t2.wait 3600
SET %t3.wait 1800
SET %rh.wait 14400
}
ON *:UNLOAD: {
UNSET %t2.wait
UNSET %t3.wait
UNSET %rh.wait
UNSET %AutoHost
}
ON *:EXIT: {
UNSET %AutoHost
}
; ** This section looks for ANY time that you host a channel (not just auto-host) and displays a
; ** message in your channel that you are currently hosting another channel.
; ** If you are hosting for more than 1 active viewer, it will also display that in the message.
; ** This also sets the %current.host variable needed for the rest of the script.
RAW *:*: {
IF (($nick == tmi.twitch.tv) && (HOSTTARGET isin $rawmsg) && (%mychan isin $rawmsg)) {
tokenize 32 $rawmsg
IF ($chr(45) !isin $4) {
SET %current.host $twitch_name($remove($4, :))
IF (%current.host != $null) && ($5 isnum 2-) MSG %mychan We are now hosting %current.host with $5 active viewers. %current.host is playing $currentgame(%current.host) for $viewers(%current.host) viewers. Uptime: $streamuptime(%current.host) $+ . Go visit them at twitch.tv/ $+ %current.host and say hello, but also remember to keep your name HERE in chat to earn extra %curname $+ !
ELSEIF (%current.host != $null) && ($5 isnum 0-1) MSG %mychan We are now hosting %current.host who is playing $currentgame(%current.host) for $viewers(%current.host) viewers. Uptime: $streamuptime(%current.host) $+ . Go visit them at twitch.tv/ $+ %current.host and say hello, but also remember to keep your name HERE in chat to earn extra %curname $+ !
}
}
}
alias currentgame {
JSONOpen -ud currentgame https://api.twitch.tv/kraken/channels/ $+ $1
IF ($json(currentgame, game)) return $v1
ELSE return ????
JSONClose currentgame
}
alias viewers {
JSONOpen -ud viewers https://api.twitch.tv/kraken/streams/ $+ $1
IF ($json(viewers, stream, viewers)) return $v1
ELSE return ????
JSONClose viewers
}
alias streamuptime {
JSONOpen -ud uptime https://api.twitch.tv/kraken/streams/ $+ $1
IF ($JSON(uptime, stream, created_at)) return $duration($calc($ctime - $TwitchTime($JSON(uptime, stream, created_at))),2)
ELSE return ????
JSONClose streamuptime
}
alias TwitchTime {
if ($regex($1-, /^(\d\d(?:\d\d)?)-(\d\d)-(\d\d)T(\d\d)\:(\d\d)\:(\d\d)(?:(?:Z$)|(?:([+-])(\d\d)\:(\d+)))?$/i)) {
var %m = $Gettok(January February March April May June July August September October November December, $regml(2), 32), %d = $ord($base($regml(3),10,10)), %o = +0, %t
if ($regml(0) > 6) %o = $regml(7) $+ $calc($regml(8) * 3600 + $regml(9))
%t = $calc($ctime(%m %d $regml(1) $regml(4) $+ : $+ $regml(5) $+ : $+ $regml(6)) - %o)
if ($asctime(zz) !== 0 && $regex($v1, /^([+-])(\d\d)(\d+)$/)) {
%o = $regml(1) $+ $calc($regml(2) * 3600 + $regml(3))
%t = $calc(%t + %o )
}
return %t
}
}
; ** This section will immediately run the autohost script as soon as the current host
; ** goes offline and auto-hosting is currently enabled (as long as the autohost script
; ** isn't already searching for another host).
RAW *:*: {
IF (%AutoHost == On) && (HOSTTARGET isin $rawmsg) && (%mychan isin $rawmsg) && ($chr(45) isin $rawmsg) && ($nick == tmi.twitch.tv) && (!%ah.run) {
timer.[AUTOHOST] 0 300 autohost
autohost
}
}
; ** This is the auto-host command. When a mod on your channel sends a whisper to your bot with
; ** "!autohost on" or "!autohost off" it will enable or disable autohosting.
; **
; ** If a channel is currently being hosted when the "!autohost on" command is ran, it will add that
; ** channel as a temporary "Tier 1" channel, regardless of if it is in the autohost.txt file or not.
; ** This is a personal preference, as I generally don't want the autohost to start looking for other
; ** channels until the channel that I was just visiting has gone offline. Modify it to your preference.
; **
; ** "!autohost on" sets a timer to run the autohost script every five minutes.
ON *:TEXT:!autohost &:?: {
IF ($nick isop %mychan) {
IF ($2 == on) {
IF (!%AutoHost) {
MSG $nick Auto-Host is now on!
UNSET %current.host
IF ($getcurrenthost == true) {
SET %ah.tier 1
SET %ah.uptime $ctime
}
SET %AutoHost On
.timer.[AUTOHOST] 0 300 autohost
IF (!%current.host) autohost
}
ELSE MSG $nick Auto-host is already on!
}
IF ($2 == off) {
IF (%AutoHost == On) {
MSG $nick Auto-Host is now disabled!
.timer.[AUTOHOST] off
UNSET %AutoHost
}
ELSE MSG $nick Auto-host was not on!
}
}
}
; ** !nexthost will unhost the current host and force a search for a new host.
ON *:TEXT:!nexthost:?: {
IF ($nick isop %mychan) {
IF (%AutoHost == On) {
IF (!%ah.run) {
timer.[AUTOHOST] off
UNSET %current.host
MSG %mychan .unhost
MSG $nick The current host has been skipped! Now searching for another host!
timer.[AUTOHOST] 0 300 autohost
}
ELSE MSG $nick Auto-Host is currently running! Please try again in a few moments!
}
IF (%AutoHost == Off) MSG $nick Auto-Host is not on!
}
}
; ** !settier # will force a temporary tier for the current host.
ON *:TEXT:!settier &:?: {
IF ($nick isop %mychan) && ($2 isnum 1-3) {
IF (!%ah.run) {
SET %ah.tier $floor($2)
MSG $nick The current host has been temporarily set as a Tier $2 host!
}
ELSE MSG $nick Auto-Host is currently running! Please try again in a few moments!
}
}
; ****** This is the main autohost script. ******
alias autohost {
SET %ah.run True
; ** two ways to check if the current host is live, as Twitch is prone to API
; ** downtime and other various malfunctions quite often.
IF (($livecheck(%current.host) == true) || ($getcurrenthost == true)) VAR %still.live True
IF (%still.live) {
IF (%ah.tier == 1) { UNSET %ah.run | halt }
IF (%ah.tier == 2) && ($calc($ctime - %ah.uptime) < %t2.wait) { UNSET %ah.run | halt }
IF (%ah.tier == 3) && ($calc($ctime - %ah.uptime) < %t3.wait) { UNSET %ah.run | halt }
}
VAR %x = 1
WHILE ($wildtok($read(autohost.txt, n, 1), *, %x, 32) != $null) {
VAR %ahn $wildtok($read(autohost.txt, n, 1), *, %x, 32)
IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) {
SET %ah.tier 1
autohost2
halt
}
INC %x
}
IF (%still.live) && (%ah.tier == 2) { UNSET %ah.run | halt }
VAR %x = 1
WHILE ($wildtok($read(autohost.txt, n, 2), *, %x, 32) != $null) {
VAR %ahn $wildtok($read(autohost.txt, n, 2), *, %x, 32)
IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) {
SET %ah.tier 2
autohost2
halt
}
INC %x
}
IF (%still.live) && ((%ah.tier == 2) || (%ah.tier == 3)) { UNSET %ah.run | halt }
VAR %x = 1
WHILE ($wildtok($read(autohost.txt, n, 3), *, %x, 32) != $null) {
VAR %ahn $wildtok($read(autohost.txt, n, 3), *, %x, 32)
IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) {
SET %ah.tier 3
autohost2
halt
}
INC %x
}
UNSET %ah.run
}
alias autohost2 {
MSG %mychan .host %livechannel
SET %ah.uptime $ctime
INC %no.rehost
WRITE -l $+ %no.rehost norehost.txt %livechannel $ctime
IF (%no.rehost == 20) %no.rehost = 0
UNSET %livechannel
.timer.unset.ah.run 1 10 UNSET %ah.run
}
; ****** These are the various aliases needed for the script to function. ******
alias rehostcheck {
VAR %rhcount = 1
IF ($exists(norehost.txt)) {
WHILE ($read(norehost.txt, %rhcount) != $null) {
VAR %rhnick = $wildtok($read(norehost.txt, %rhcount), *, 1, 32)
VAR %rhtime = $wildtok($read(norehost.txt, %rhcount), *, 2, 32)
IF ($calc($ctime - %rhtime) < %rh.wait) && (%rhnick == $1) return true
INC %rhcount
}
}
}
alias livecheck {
IF (%tu == 1000) %tu = 0
INC %tu
JSONOpen -ud live $+ %tu https://api.twitch.tv/kraken/streams/ $+ $1 $+ ?nocache= $+ $ticks
IF ( $json(live $+ %tu $+ ,stream) != $null ) {
SET %livechannel $1
return true
}
JSONClose live $+ %tu
}
alias getcurrenthost {
JSONOpen -ud currenthost http://tmi.twitch.tv/hosts?include_logins=1&host= $+ %TwitchID
IF ( $json(currenthost, hosts, 0, target_login) != $null ) {
SET %current.host $json(currenthost, hosts, 0, target_login)
return true
}
JSONClose currenthost
}
