[FIXED] [Twitch] Help with Autohost Script - 06/07/16 11:41 PM
I'm trying to understand all of this stuff, but I don't know where I can fix it. The scripts were shared by Blas (mIRC forum user 128673) on his github along with twitch chat games and the like. I combined his "nowhosting" and his "autohost" scripts together. Even before I merged the two, it didn't seem to host anyone. This is what I have now:
Code:
/* **************************************************************************** ************** Twitch Multi-Tier Advanced Auto-Hosting Script ************** **************************************************************************** ** This script is a three tier based auto-hosting script for twitch.tv. ** To use it, you must create an autohost.txt file in your mIRC directory. ** Put all of the channels that you want to auto-host on either line 1, 2, or 3 of autohost.txt. ** All channels on line 1 will be "Tier 1." All channels on line 2 will be "Tier 2." ** All channels on line 3 will be "Tier 3." Seperate channel names with a space. ** ** When the autohost alias is ran, it will search each tier in the order that channels are listed. ** If a Tier 1 channel is still live and being hosted, the script will simply end. ** If a Tier 2 channel is still live and being hosted, the script will look for a Tier 1 channel ** to host if the amount of time passed since the host began is greater than %t2.wait. ** If a Tier 3 channel is still live and being hosted, the script will look for a Tier 1 or 2 ** channel to host if the amount of time passed since the host began is greater than %t3.wait. ** ** Set the variables below that are needed for the script. ** Change %mychan to your own channel name (keep the # symbol). ** Change %t2.wait to the amount of time (in seconds) that you want the autohost script to wait ** before trying to host a Tier 1 channel if a Tier 2 channel is still being hosted. ** Change %t3.wait to the amount of time (in seconds) that you want the autohost script to wait ** before trying to host a Tier 1 or Tier 2 channel if a Tier 3 channel is being hosted. ** Change %rh.wait to the amount of time (in seconds) that you want the autohost script to wait ** before being allowed to host the same channel again. ** ** This script needs the JSON and mTwitch scripts in the "required scripts" section of the GitHub. ** This script needs the $twitch_name alias and %mychan and %TwitchID variables from ankhbot.mrc. ** ** You will need to un-load and re-load this script for the changes to the variables below ** to take effect. */ ON *:LOAD: { SET %t2.wait 3600 SET %t3.wait 1800 SET %rh.wait 14400 } ON *:UNLOAD: { UNSET %t2.wait UNSET %t3.wait UNSET %rh.wait UNSET %AutoHost } ON *:EXIT: { UNSET %AutoHost } ; ** This section looks for ANY time that you host a channel (not just auto-host) and displays a ; ** message in your channel that you are currently hosting another channel. ; ** If you are hosting for more than 1 active viewer, it will also display that in the message. ; ** This also sets the %current.host variable needed for the rest of the script. RAW *:*: { IF (($nick == tmi.twitch.tv) && (HOSTTARGET isin $rawmsg) && (%mychan isin $rawmsg)) { tokenize 32 $rawmsg IF ($chr(45) !isin $4) { SET %current.host $twitch_name($remove($4, :)) IF (%current.host != $null) && ($5 isnum 2-) MSG %mychan We are now hosting %current.host with $5 active viewers. %current.host is playing $currentgame(%current.host) for $viewers(%current.host) viewers. Uptime: $streamuptime(%current.host) $+ . Go visit them at twitch.tv/ $+ %current.host and say hello, but also remember to keep your name HERE in chat to earn extra %curname $+ ! ELSEIF (%current.host != $null) && ($5 isnum 0-1) MSG %mychan We are now hosting %current.host who is playing $currentgame(%current.host) for $viewers(%current.host) viewers. Uptime: $streamuptime(%current.host) $+ . Go visit them at twitch.tv/ $+ %current.host and say hello, but also remember to keep your name HERE in chat to earn extra %curname $+ ! } } } alias currentgame { JSONOpen -ud currentgame https://api.twitch.tv/kraken/channels/ $+ $1 IF ($json(currentgame, game)) return $v1 ELSE return ???? JSONClose currentgame } alias viewers { JSONOpen -ud viewers https://api.twitch.tv/kraken/streams/ $+ $1 IF ($json(viewers, stream, viewers)) return $v1 ELSE return ???? JSONClose viewers } alias streamuptime { JSONOpen -ud uptime https://api.twitch.tv/kraken/streams/ $+ $1 IF ($JSON(uptime, stream, created_at)) return $duration($calc($ctime - $TwitchTime($JSON(uptime, stream, created_at))),2) ELSE return ???? JSONClose streamuptime } alias TwitchTime { if ($regex($1-, /^(\d\d(?:\d\d)?)-(\d\d)-(\d\d)T(\d\d)\:(\d\d)\:(\d\d)(?:(?:Z$)|(?:([+-])(\d\d)\:(\d+)))?$/i)) { var %m = $Gettok(January February March April May June July August September October November December, $regml(2), 32), %d = $ord($base($regml(3),10,10)), %o = +0, %t if ($regml(0) > 6) %o = $regml(7) $+ $calc($regml(8) * 3600 + $regml(9)) %t = $calc($ctime(%m %d $regml(1) $regml(4) $+ : $+ $regml(5) $+ : $+ $regml(6)) - %o) if ($asctime(zz) !== 0 && $regex($v1, /^([+-])(\d\d)(\d+)$/)) { %o = $regml(1) $+ $calc($regml(2) * 3600 + $regml(3)) %t = $calc(%t + %o ) } return %t } } ; ** This section will immediately run the autohost script as soon as the current host ; ** goes offline and auto-hosting is currently enabled (as long as the autohost script ; ** isn't already searching for another host). RAW *:*: { IF (%AutoHost == On) && (HOSTTARGET isin $rawmsg) && (%mychan isin $rawmsg) && ($chr(45) isin $rawmsg) && ($nick == tmi.twitch.tv) && (!%ah.run) { timer.[AUTOHOST] 0 300 autohost autohost } } ; ** This is the auto-host command. When a mod on your channel sends a whisper to your bot with ; ** "!autohost on" or "!autohost off" it will enable or disable autohosting. ; ** ; ** If a channel is currently being hosted when the "!autohost on" command is ran, it will add that ; ** channel as a temporary "Tier 1" channel, regardless of if it is in the autohost.txt file or not. ; ** This is a personal preference, as I generally don't want the autohost to start looking for other ; ** channels until the channel that I was just visiting has gone offline. Modify it to your preference. ; ** ; ** "!autohost on" sets a timer to run the autohost script every five minutes. ON *:TEXT:!autohost &:?: { IF ($nick isop %mychan) { IF ($2 == on) { IF (!%AutoHost) { MSG $nick Auto-Host is now on! UNSET %current.host IF ($getcurrenthost == true) { SET %ah.tier 1 SET %ah.uptime $ctime } SET %AutoHost On .timer.[AUTOHOST] 0 300 autohost IF (!%current.host) autohost } ELSE MSG $nick Auto-host is already on! } IF ($2 == off) { IF (%AutoHost == On) { MSG $nick Auto-Host is now disabled! .timer.[AUTOHOST] off UNSET %AutoHost } ELSE MSG $nick Auto-host was not on! } } } ; ** !nexthost will unhost the current host and force a search for a new host. ON *:TEXT:!nexthost:?: { IF ($nick isop %mychan) { IF (%AutoHost == On) { IF (!%ah.run) { timer.[AUTOHOST] off UNSET %current.host MSG %mychan .unhost MSG $nick The current host has been skipped! Now searching for another host! timer.[AUTOHOST] 0 300 autohost } ELSE MSG $nick Auto-Host is currently running! Please try again in a few moments! } IF (%AutoHost == Off) MSG $nick Auto-Host is not on! } } ; ** !settier # will force a temporary tier for the current host. ON *:TEXT:!settier &:?: { IF ($nick isop %mychan) && ($2 isnum 1-3) { IF (!%ah.run) { SET %ah.tier $floor($2) MSG $nick The current host has been temporarily set as a Tier $2 host! } ELSE MSG $nick Auto-Host is currently running! Please try again in a few moments! } } ; ****** This is the main autohost script. ****** alias autohost { SET %ah.run True ; ** two ways to check if the current host is live, as Twitch is prone to API ; ** downtime and other various malfunctions quite often. IF (($livecheck(%current.host) == true) || ($getcurrenthost == true)) VAR %still.live True IF (%still.live) { IF (%ah.tier == 1) { UNSET %ah.run | halt } IF (%ah.tier == 2) && ($calc($ctime - %ah.uptime) < %t2.wait) { UNSET %ah.run | halt } IF (%ah.tier == 3) && ($calc($ctime - %ah.uptime) < %t3.wait) { UNSET %ah.run | halt } } VAR %x = 1 WHILE ($wildtok($read(autohost.txt, n, 1), *, %x, 32) != $null) { VAR %ahn $wildtok($read(autohost.txt, n, 1), *, %x, 32) IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) { SET %ah.tier 1 autohost2 halt } INC %x } IF (%still.live) && (%ah.tier == 2) { UNSET %ah.run | halt } VAR %x = 1 WHILE ($wildtok($read(autohost.txt, n, 2), *, %x, 32) != $null) { VAR %ahn $wildtok($read(autohost.txt, n, 2), *, %x, 32) IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) { SET %ah.tier 2 autohost2 halt } INC %x } IF (%still.live) && ((%ah.tier == 2) || (%ah.tier == 3)) { UNSET %ah.run | halt } VAR %x = 1 WHILE ($wildtok($read(autohost.txt, n, 3), *, %x, 32) != $null) { VAR %ahn $wildtok($read(autohost.txt, n, 3), *, %x, 32) IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) { SET %ah.tier 3 autohost2 halt } INC %x } UNSET %ah.run } alias autohost2 { MSG %mychan .host %livechannel SET %ah.uptime $ctime INC %no.rehost WRITE -l $+ %no.rehost norehost.txt %livechannel $ctime IF (%no.rehost == 20) %no.rehost = 0 UNSET %livechannel .timer.unset.ah.run 1 10 UNSET %ah.run } ; ****** These are the various aliases needed for the script to function. ****** alias rehostcheck { VAR %rhcount = 1 IF ($exists(norehost.txt)) { WHILE ($read(norehost.txt, %rhcount) != $null) { VAR %rhnick = $wildtok($read(norehost.txt, %rhcount), *, 1, 32) VAR %rhtime = $wildtok($read(norehost.txt, %rhcount), *, 2, 32) IF ($calc($ctime - %rhtime) < %rh.wait) && (%rhnick == $1) return true INC %rhcount } } } alias livecheck { IF (%tu == 1000) %tu = 0 INC %tu JSONOpen -ud live $+ %tu https://api.twitch.tv/kraken/streams/ $+ $1 $+ ?nocache= $+ $ticks IF ( $json(live $+ %tu $+ ,stream) != $null ) { SET %livechannel $1 return true } JSONClose live $+ %tu } alias getcurrenthost { JSONOpen -ud currenthost http://tmi.twitch.tv/hosts?include_logins=1&host= $+ %TwitchID IF ( $json(currenthost, hosts, 0, target_login) != $null ) { SET %current.host $json(currenthost, hosts, 0, target_login) return true } JSONClose currenthost }