mIRC Home    About    Download    Register    News    Help

Print Thread
Joined: Jul 2016
Posts: 4
H
Self-satisified door
OP Offline
Self-satisified door
H
Joined: Jul 2016
Posts: 4
I'm trying to understand all of this stuff, but I don't know where I can fix it. The scripts were shared by Blas (mIRC forum user 128673) on his github along with twitch chat games and the like. I combined his "nowhosting" and his "autohost" scripts together. Even before I merged the two, it didn't seem to host anyone. This is what I have now:

Code:
/*
****************************************************************************
************** Twitch Multi-Tier Advanced Auto-Hosting Script **************
****************************************************************************

** This script is a three tier based auto-hosting script for twitch.tv.
** To use it, you must create an autohost.txt file in your mIRC directory.
** Put all of the channels that you want to auto-host on either line 1, 2, or 3 of autohost.txt.
** All channels on line 1 will be "Tier 1." All channels on line 2 will be "Tier 2."
** All channels on line 3 will be "Tier 3." Seperate channel names with a space.
**
** When the autohost alias is ran, it will search each tier in the order that channels are listed.
** If a Tier 1 channel is still live and being hosted, the script will simply end.
** If a Tier 2 channel is still live and being hosted, the script will look for a Tier 1 channel
** to host if the amount of time passed since the host began is greater than %t2.wait.
** If a Tier 3 channel is still live and being hosted, the script will look for a Tier 1 or 2
** channel to host if the amount of time passed since the host began is greater than %t3.wait.
**
** Set the variables below that are needed for the script.
** Change %mychan to your own channel name (keep the # symbol).
** Change %t2.wait to the amount of time (in seconds) that you want the autohost script to wait
** before trying to host a Tier 1 channel if a Tier 2 channel is still being hosted.
** Change %t3.wait to the amount of time (in seconds) that you want the autohost script to wait
** before trying to host a Tier 1 or Tier 2 channel if a Tier 3 channel is being hosted.
** Change %rh.wait to the amount of time (in seconds) that you want the autohost script to wait
** before being allowed to host the same channel again.
**
** This script needs the JSON and mTwitch scripts in the "required scripts" section of the GitHub.
** This script needs the $twitch_name alias and %mychan and %TwitchID variables from ankhbot.mrc.
**
** You will need to un-load and re-load this script for the changes to the variables below
** to take effect.
*/

ON *:LOAD: {
  SET %t2.wait 3600
  SET %t3.wait 1800
  SET %rh.wait 14400
}

ON *:UNLOAD: {
  UNSET %t2.wait
  UNSET %t3.wait
  UNSET %rh.wait
  UNSET %AutoHost
}

ON *:EXIT: {
  UNSET %AutoHost
}

; ** This section looks for ANY time that you host a channel (not just auto-host) and displays a
; ** message in your channel that you are currently hosting another channel.
; ** If you are hosting for more than 1 active viewer, it will also display that in the message.
; ** This also sets the %current.host variable needed for the rest of the script.

RAW *:*: {
  IF (($nick == tmi.twitch.tv) && (HOSTTARGET isin $rawmsg) && (%mychan isin $rawmsg)) {
    tokenize 32 $rawmsg
    IF ($chr(45) !isin $4) {
      SET %current.host $twitch_name($remove($4, :))
      IF (%current.host != $null) && ($5 isnum 2-) MSG %mychan We are now hosting %current.host with $5 active viewers. %current.host is playing $currentgame(%current.host) for $viewers(%current.host) viewers. Uptime: $streamuptime(%current.host) $+ . Go visit them at twitch.tv/ $+ %current.host and say hello, but also remember to keep your name HERE in chat to earn extra %curname $+ !
      ELSEIF (%current.host != $null) && ($5 isnum 0-1) MSG %mychan We are now hosting %current.host who is playing $currentgame(%current.host) for $viewers(%current.host) viewers. Uptime: $streamuptime(%current.host) $+ . Go visit them at twitch.tv/ $+ %current.host and say hello, but also remember to keep your name HERE in chat to earn extra %curname $+ !
    }
  }
}

alias currentgame {
  JSONOpen -ud currentgame https://api.twitch.tv/kraken/channels/ $+ $1
  IF ($json(currentgame, game)) return $v1
  ELSE return ????
  JSONClose currentgame
}

alias viewers {
  JSONOpen -ud viewers https://api.twitch.tv/kraken/streams/ $+ $1
  IF ($json(viewers, stream, viewers)) return $v1
  ELSE return ????
  JSONClose viewers
}

alias streamuptime {
  JSONOpen -ud uptime https://api.twitch.tv/kraken/streams/ $+ $1
  IF ($JSON(uptime, stream, created_at)) return $duration($calc($ctime - $TwitchTime($JSON(uptime, stream, created_at))),2)
  ELSE return ????
  JSONClose streamuptime
}

alias TwitchTime {
  if ($regex($1-, /^(\d\d(?:\d\d)?)-(\d\d)-(\d\d)T(\d\d)\:(\d\d)\:(\d\d)(?:(?:Z$)|(?:([+-])(\d\d)\:(\d+)))?$/i)) {
    var %m = $Gettok(January February March April May June July August September October November December, $regml(2), 32), %d = $ord($base($regml(3),10,10)), %o = +0, %t
    if ($regml(0) > 6) %o = $regml(7) $+ $calc($regml(8) * 3600 + $regml(9))
    %t = $calc($ctime(%m %d $regml(1) $regml(4) $+ : $+ $regml(5) $+ : $+ $regml(6)) - %o)
    if ($asctime(zz) !== 0 && $regex($v1, /^([+-])(\d\d)(\d+)$/)) {
      %o = $regml(1) $+ $calc($regml(2) * 3600 + $regml(3))
      %t = $calc(%t + %o )
    }
    return %t
  }
}

; ** This section will immediately run the autohost script as soon as the current host
; ** goes offline and auto-hosting is currently enabled (as long as the autohost script
; ** isn't already searching for another host).

RAW *:*: {
  IF (%AutoHost == On) && (HOSTTARGET isin $rawmsg) && (%mychan isin $rawmsg) && ($chr(45) isin $rawmsg) && ($nick == tmi.twitch.tv) && (!%ah.run) {
    timer.[AUTOHOST] 0 300 autohost
    autohost
  }
}

; ** This is the auto-host command.  When a mod on your channel sends a whisper to your bot with
; ** "!autohost on" or "!autohost off" it will enable or disable autohosting.
; **
; ** If a channel is currently being hosted when the "!autohost on" command is ran, it will add that
; ** channel as a temporary "Tier 1" channel, regardless of if it is in the autohost.txt file or not.
; ** This is a personal preference, as I generally don't want the autohost to start looking for other
; ** channels until the channel that I was just visiting has gone offline.  Modify it to your preference.
; **
; ** "!autohost on" sets a timer to run the autohost script every five minutes.

ON *:TEXT:!autohost &:?: {
  IF ($nick isop %mychan) {
    IF ($2 == on) {
      IF (!%AutoHost) {
        MSG $nick Auto-Host is now on!
        UNSET %current.host
        IF ($getcurrenthost == true) {
          SET %ah.tier 1
          SET %ah.uptime $ctime
        }
        SET %AutoHost On
        .timer.[AUTOHOST] 0 300 autohost
        IF (!%current.host) autohost
      }
      ELSE MSG $nick Auto-host is already on!
    }
    IF ($2 == off) {
      IF (%AutoHost == On) {
        MSG $nick Auto-Host is now disabled!
        .timer.[AUTOHOST] off
        UNSET %AutoHost
      }
      ELSE MSG $nick Auto-host was not on!
    }
  }
}

; ** !nexthost will unhost the current host and force a search for a new host.

ON *:TEXT:!nexthost:?: {
  IF ($nick isop %mychan) {
    IF (%AutoHost == On) {
      IF (!%ah.run) {
        timer.[AUTOHOST] off
        UNSET %current.host
        MSG %mychan .unhost
        MSG $nick The current host has been skipped!  Now searching for another host!
        timer.[AUTOHOST] 0 300 autohost
      }
      ELSE MSG $nick Auto-Host is currently running!  Please try again in a few moments!
    }
    IF (%AutoHost == Off) MSG $nick Auto-Host is not on!
  }
}

; ** !settier # will force a temporary tier for the current host.

ON *:TEXT:!settier &:?: {
  IF ($nick isop %mychan) && ($2 isnum 1-3) {
    IF (!%ah.run) {
      SET %ah.tier $floor($2)
      MSG $nick The current host has been temporarily set as a Tier $2 host!
    }
    ELSE MSG $nick Auto-Host is currently running!  Please try again in a few moments!
  }
}

; ****** This is the main autohost script.  ******

alias autohost {

  SET %ah.run True

  ; ** two ways to check if the current host is live, as Twitch is prone to API
  ; ** downtime and other various malfunctions quite often.

  IF (($livecheck(%current.host) == true) || ($getcurrenthost == true)) VAR %still.live True

  IF (%still.live) {
    IF (%ah.tier == 1) { UNSET %ah.run | halt }
    IF (%ah.tier == 2) && ($calc($ctime - %ah.uptime) < %t2.wait) { UNSET %ah.run | halt }
    IF (%ah.tier == 3) && ($calc($ctime - %ah.uptime) < %t3.wait) { UNSET %ah.run | halt }
  }

  VAR %x = 1
  WHILE ($wildtok($read(autohost.txt, n, 1), *, %x, 32) != $null) {
    VAR %ahn $wildtok($read(autohost.txt, n, 1), *, %x, 32)
    IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) {
      SET %ah.tier 1
      autohost2
      halt
    }
    INC %x
  }

  IF (%still.live) && (%ah.tier == 2) { UNSET %ah.run | halt }
  VAR %x = 1
  WHILE ($wildtok($read(autohost.txt, n, 2), *, %x, 32) != $null) {
    VAR %ahn $wildtok($read(autohost.txt, n, 2), *, %x, 32)
    IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) {
      SET %ah.tier 2
      autohost2
      halt
    }
    INC %x
  }

  IF (%still.live) && ((%ah.tier == 2) || (%ah.tier == 3)) { UNSET %ah.run | halt }
  VAR %x = 1
  WHILE ($wildtok($read(autohost.txt, n, 3), *, %x, 32) != $null) {
    VAR %ahn $wildtok($read(autohost.txt, n, 3), *, %x, 32)
    IF ($livecheck(%ahn) == true) && ($rehostcheck(%ahn) != true) && (%livechannel != %current.host) {
      SET %ah.tier 3
      autohost2
      halt
    }
    INC %x
  }
  UNSET %ah.run
}

alias autohost2 {

  MSG %mychan .host %livechannel
  SET %ah.uptime $ctime
  INC %no.rehost
  WRITE -l $+ %no.rehost norehost.txt %livechannel $ctime
  IF (%no.rehost == 20) %no.rehost = 0
  UNSET %livechannel
  .timer.unset.ah.run 1 10 UNSET %ah.run
}

; ****** These are the various aliases needed for the script to function.  ******

alias rehostcheck {

  VAR %rhcount = 1
  IF ($exists(norehost.txt)) {
    WHILE ($read(norehost.txt, %rhcount) != $null) {
      VAR %rhnick = $wildtok($read(norehost.txt, %rhcount), *, 1, 32)
      VAR %rhtime = $wildtok($read(norehost.txt, %rhcount), *, 2, 32)
      IF ($calc($ctime - %rhtime) < %rh.wait) && (%rhnick == $1) return true
      INC %rhcount
    }
  }
}

alias livecheck {

  IF (%tu == 1000) %tu = 0
  INC %tu
  JSONOpen -ud live $+ %tu https://api.twitch.tv/kraken/streams/ $+ $1 $+ ?nocache= $+ $ticks
  IF ( $json(live $+ %tu $+ ,stream) != $null ) {
    SET %livechannel $1
    return true
  }
  JSONClose live $+ %tu
}

alias getcurrenthost {

  JSONOpen -ud currenthost http://tmi.twitch.tv/hosts?include_logins=1&host= $+ %TwitchID
  IF ( $json(currenthost, hosts, 0, target_login) != $null ) {
    SET %current.host $json(currenthost, hosts, 0, target_login)
    return true
  }
  JSONClose currenthost
}

Last edited by HoodedDemon; 07/07/16 12:27 AM. Reason: I had a file in the wrong directory.
Joined: Jun 2015
Posts: 84
F
Babel fish
Offline
Babel fish
F
Joined: Jun 2015
Posts: 84
Out of curiousity, are you also using the JSON Script by SReject?

If not, it breaks things as you need that for the API calls in some of the aliases.

Joined: Jul 2016
Posts: 4
H
Self-satisified door
OP Offline
Self-satisified door
H
Joined: Jul 2016
Posts: 4
All of the scripts that I'm currently running are:

  • JSONforMirc
  • mTwitch.core
  • mTwitch.DisplayName
  • msqlite
  • ankhbot


Scripts I'm running from Blas:

  • randuser
  • give
  • blackjack
  • jackpot.classic
  • slots.classic
  • syphon
  • raids
  • hosts
  • autohost

Last edited by HoodedDemon; 07/07/16 12:09 AM.
Joined: Jul 2016
Posts: 4
H
Self-satisified door
OP Offline
Self-satisified door
H
Joined: Jul 2016
Posts: 4
I found out what the problem was! I made the dumbest mistake of not putting the file needed in the right directory. I had it in program files instead of %appdata%. frown Thanks for the help, though.

Joined: Dec 2008
Posts: 1,513
Hoopy frood
Offline
Hoopy frood
Joined: Dec 2008
Posts: 1,513
Actually if you are using -d parameter in /JSONOpen then you don't have to place the /JSONClose alias too, the -d closes the JSON name after the script execution will end.


Need Online mIRC help or an mIRC Scripting Freelancer? -> https://irc.chathub.org <-

Link Copied to Clipboard