Register Log In

Forums General Discussion what did these commands do ?

Print Thread

what did these commands do ? #273485 08/07/25 09:58 AM
Joined: Jun 2009 Posts: 101 V vinifera OP Vogon poet
OP vinifera Vogon poet V Joined: Jun 2009 Posts: 101	for mirc 6.21 there were 2 undocumented commands /pdcc (think it was called "pump dcc") and /fsend on/off (as in fast send, again tied to dcc) but what did they do exactly ?

Re: what did these commands do ? vinifera #273487 08/07/25 03:08 PM
Joined: Dec 2002 Posts: 2,002 R RoCk Hoopy frood
RoCk Hoopy frood R Joined: Dec 2002 Posts: 2,002	https://forums.mirc.com/ubbthreads....between-fsend-and-pdcc-khaled#Post200971

Re: what did these commands do ? RoCk #273489 08/07/25 10:08 PM
Joined: Jun 2009 Posts: 101 V vinifera OP Vogon poet
OP vinifera Vogon poet V Joined: Jun 2009 Posts: 101	wow, thanks alot !

Re: what did these commands do ? vinifera #273606 14/08/25 07:43 PM
Joined: Jun 2009 Posts: 101 V vinifera OP Vogon poet
OP vinifera Vogon poet V Joined: Jun 2009 Posts: 101	see this is another problem i encountered mirc remembers if /pdcc and /fsend are on or off but nothing gets written in mirc.ini so where does it go "written" ?

Re: what did these commands do ? vinifera #273607 15/08/25 03:25 AM
Joined: Dec 2002 Posts: 2,002 R RoCk Hoopy frood
RoCk Hoopy frood R Joined: Dec 2002 Posts: 2,002	mirc.ini [options] fast send n3 position 10 pump dcc n5 position 12

Re: what did these commands do ?

RoCk #273608 15/08/25 11:21 AM

Joined: Jun 2009

Posts: 101

V

Offline

OP

Vogon poet

OP

Offline

Vogon poet

V

Joined: Jun 2009

Posts: 101

i don't have such results

i have this (both enabled)

Code

[options]
n0=0,1,0,0,0,1,300,0,0,1,1,0,1,0,0,0,1,0,1,0,4096,0,1,0,1,1,0,1,0,50,0,1,0,1,0
n1=0,50,0,0,0,0,14,0,7,1,0,1,0,0,1,1,0,1,0,0,0,1,0,0,5,0,0,0,0,0,0,0,0,0,1,10
n2=0,0,0,0,1,1,1,1,0,999,120,0,0,1,0,0,1,1,1,120,20,10,0,0,1,0,1,1,0,0,0,0,0,0,1,0
n3=1000,1,0,0,1,0,1,1,0,1,0,1,0,0,1,1,1,1,0,0,0,0,1,0,1,0,0,9,0,0,0,3,180,0,0,0,0
n4=1,0,1,1,0,0,9999,1,0,0,0,1,1024,0,1,9999,120,0,0,0,0,1,1,0,1,4000,1,11,0,0,11,0,1,1,0,0,1
n5=1,1,1,1,1,1,1,1,1,1,0,500000,0,0,1,1,1,1,100,10,3,0,0,29,0,1,0,10240,1,0,0,82,0,1,0,0
n6=0,1,0,1,0,1,0,0,1,1,0,0,0,0,0,0,1,0,0,0,0,0,100,1,1,0,0,0,0,1,11,1,0,1,0,0
n7=1,0,0,0,0,0,0,1,1,1,1,0,0,1,0,0,1,70,0,3,1,1,1,1,1,1,0,0,0,0,1,1,1,1,1,0,1
n8=1,3,1,205,1,1,1,2,0,0,0,0,1,0,0,0,1,0,0,0,0,0

Re: what did these commands do ? vinifera #273610 15/08/25 03:55 PM
Joined: Dec 2002 Posts: 2,002 R RoCk Hoopy frood
RoCk Hoopy frood R Joined: Dec 2002 Posts: 2,002	I don't know what's going on with that 500000 in the 12th position your n5, but it should be either 1 or 0 (on or off) The 10th position of your n3 looks correct with 1 (on).

Re: what did these commands do ? vinifera #273611 15/08/25 04:41 PM
Joined: Dec 2002 Posts: 2,002 R RoCk Hoopy frood
RoCk Hoopy frood R Joined: Dec 2002 Posts: 2,002	These are from 'mIRC.ini Unleashed'. It's pretty old but, I have the CHM file. I can't find any sites to download it but, If you want to message me your email, I'll send it to you. https://web.archive.org/web/20060118093338/http://www.mishscript.de/help/mircini/n3.htm https://web.archive.org/web/20060118093338/http://www.mishscript.de/help/mircini/n5.htm

Link Copied to Clipboard