I'll try as briefly as possible to tell you how a router works in conjunction with mIRC
mIrc normally uses a random range of ports for DCC between 1024 and 5000 (quite a lot, but we dont need them all to use DCC....anyway why have almost four thousand ports to choose from when 5 or more will do? So let's configure 6 ports for DCC
Step 1. Find out the Internal Ip Address of the Computer you are using..while in mIrc type /run command or /run cmd... Then when the Dos Window opens type ipconfig and look for something similar to this
Ethernet adapter :
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Note the IP Address, you need this to configure the Router, in our case 192.168.1.100 (Yours may Differ)
-----------------------
Step 2. Open up your Router Configuration and forward ports to the IP Address you just got when doing step 1......In this case we will forward ports 4000 up to 4005 to your IP Address 192.168.1.100 (Yours may Differ) .. Thats a total of 6 ports for DCC...(Should you want more ports..its 1 port per dcc). After making changes to your router configuration click Apply or Save or whatever option it gives you to save changes and exit.
----------------------
Step 3. Go back to mirc Options (normally accessible by holding down the ALT-key and hitting the letter O (Alt + O) ...then look for Connect > Options [Advanced] ...or in older versions of mIRC DCC, then look for a sub section below DCC called options..and look where it says DCC Ports First Last (The default options here are First 1024 Last 5000) we change these to First 4000 and Last 4005 (This tells mirc to use only ports 4000 to 4005 for DCC)
----------------------
Thats it, you just configured your router and mirc to use ports 4000 to 4005, for DCC ..easy huh.?
ScoT
#mIRC Undernet
