mIRC Homepage

Unable to connect, DCC session closed

Posted By: pante000

Unable to connect, DCC session closed - 30/12/12 09:47 PM

Hi!

I installed Eggdrop bot. I setted up master password to my Eggdrop bot via mIRC.
I start dcc with this command: /ctcp _Xbot chat
But I get an error message:
Code:
DCC Chat session 
- 
Client: _Xbot (79.133.201.66) 
Time: Sun Dec 30 21:40:04 2012 
- 
Acknowledging chat request... 
- 
Unable to connect 
- 
DCC session closed


Whats the real problem? How to I connect to my bot with dcc via mIRC?

Thank you!
Posted By: Maelish

Re: Unable to connect, DCC session closed - 30/12/12 10:15 PM

Did mirc connect before without the bot? Try uninstalling the bot and starting from scratch.
Posted By: sparta

Re: Unable to connect, DCC session closed - 30/12/12 10:48 PM

If others can DCC to the bot, then try set your ip by hand.

tools/options click ports, enter your IP and try DCC again. Maybe that will help.
Posted By: pante000

Re: Unable to connect, DCC session closed - 01/01/13 11:23 AM

I tried xdcc send command on another bot (its not mine), it works fine.
So that mean, my Eggdrop bot's config is bad and my mIrc is good?
Posted By: sparta

Re: Unable to connect, DCC session closed - 01/01/13 05:52 PM

You need to tell the config file what IP to use, if it's behind a router you need to forward the port to your eggdrop.
Posted By: pante000

Re: Unable to connect, DCC session closed - 01/01/13 09:31 PM

Okay, thank you!
What will I tell?
I use Dlink wifi router, my ip is dinamic (cause of adsl): 81.182.xx.xxx
My settings on mIRC: http://i.imgur.com/uEK4W.png
Firewall add mirc.exe
Router ip: 192.168.0.1
Pc ip: 192.168.0.11
Posted By: sparta

Re: Unable to connect, DCC session closed - 01/01/13 10:17 PM

set my-hostname "" <- here you put the hostname for the bot.
set my-ip "" <- here you put the IP of the eggdrop.

And make shure you have the right flag in the bot, i think it is +p you need to be able to DCC the bot.
Posted By: pante000

Re: Unable to connect, DCC session closed - 02/01/13 07:17 PM

I tried these, but not working.
Posted By: HorseC

Re: Unable to connect, DCC session closed - 02/01/13 08:47 PM

when you have a router in the mix make sure you are port forwarding ports to mirc (i suggest 5 ports or so) and then make sure in mirc options you set the same ports! also make sure you port forward 113 used for dcc acks for dcc back. good luck
© 2020 mIRC Discussion Forums