Forums Bug Reports Invalid Page Faults when exiting mIRC

PROBLEM: First, let me say that this problem did not happen with mIRC until I updated to version 6.03. Unfortunately, I can not remember what version I was running before I updated.

When I close mIRC I get three error stops, with the big red X, in a row that look like this:

THIS PROGRAM HAS PERFORMED AN ILLEGAL OPERATION AND WILL BE SHUT DOWN.

IF THE PROBLEM PERSISTS, CONTACT THE PROGRAM VENDOR.

Each is expanded in detail below. As I click CLOSE on each one I get another immediately. After I click CLOSE on the third one there are no more.

Sometimes I find that after I exit mIRC and open the Task Manager, there is still an instance of mIRC listed under the currently executing tasks. This is not consistent.

In fact, I am having one heck of a time repeating this thing. It happens about one out of every four times I run mirc.



Hardware: Intel x86 Family 6 Model 8 Stepping 6
256MB ram

OS: Win98se 4.10.2222 A

Firewall: ZoneAlarm v 3.7.193
TrueVector v 3.7.193
Driver v 3.7.193

Firewall: Sysgate Personal v 5.1
Build 1615s
Profile 3.1.0
IDS Serial 1.0.1038

ISP connection: 56K modem at 53333 (solid)

mIRC v 6.03

MIRC caused an invalid page fault in module KERNEL32.DLL at 018f:bff8ac13.
Registers:
EAX=00000000 CS=018f EIP=bff8ac13 EFLGS=00000246
EBX=00000000 SS=0197 ESP=008ffbbc EBP=008ffc1c
ECX=82c0b198 DS=0197 ESI=82c0b198 FS=2a97
EDX=82c0402c ES=0197 EDI=00000000 GS=0000
Bytes at CS:EIP: a1 10 9d fc bf 50 e8 96 95 fe ff ff 76 04 e8 35
Stack dump:
82c0b148 7fb983e0 82c0b198 7fb98410 00000000 82c0b148 7fb98c99 82c0b148 7fb98bb7 00000000 82c0cce8 7fb98b5d 006d0f08 006d0f10 7fb98bf7 006d0f08


MIRC caused an invalid page fault in module KERNEL32.DLL at 018f:bff8ac13.
Registers:
EAX=00000000 CS=018f EIP=bff8ac13 EFLGS=00000246
EBX=00000000 SS=0197 ESP=008ffbbc EBP=008ffc1c
ECX=82c0b198 DS=0197 ESI=82c0b198 FS=2a97
EDX=82c0402c ES=0197 EDI=00000000 GS=0000
Bytes at CS:EIP: a1 10 9d fc bf 50 e8 96 95 fe ff ff 76 04 e8 35
Stack dump:
82c0b148 7fb983e0 82c0b198 7fb98410 00000000 82c0b148 7fb98c99 82c0b148 7fb98bb7 00000000 82c0cce8 7fb98b5d 006d0f08 006d0f10 7fb98bf7 006d0f08


MIRC caused an exception c0000026H in module KERNEL32.DLL at 018f:bffc04d4.
Registers:
EAX=00000000 CS=018f EIP=bffc04d4 EFLGS=00000202
EBX=00000000 SS=0197 ESP=008ff840 EBP=008ff850
ECX=008ff88c DS=0197 ESI=008ff77c FS=2a97
EDX=008ffa10 ES=0197 EDI=819b811c GS=0000
Bytes at CS:EIP: 5d 5f 5e 5b 8b e5 5d c3 8b 4c 24 04 f7 41 04 06
Stack dump:
008ff850 bff79138 00000000 008fff68 008ff874 bffc0613 008fff68 008ff874 008ffa10 819b811c 008fff68 008ffa10 008ff944 008ff898 bff76849 008ffa10

Are you running any scrips?

I do not believe so. I am not sure what a script is.

Press alt+r and see if there is something in the text box that appears, also select other files (if there are any) from the View menu and see if there is anything in them. If there is then you have a script installed. Open the mIRC 6.03 (make sure you get it from this site) installer again and install it into a different directory, then see if the new installation works.

easier way is just

//say I have $script(0) script(s) running.

If the number os above 1, you have to have a script running. >:D (Unles remote is off)

EDIT: Infact just do /remote off and see if you can get an error one more.

Not true, if it's 1 then you have a script file loaded that may well have stuff in it. I told him to install a fresh copy of mIRC to make sure no DLL's that may have come with the script were screwing it.